The PDR System is as easy to install as a phone. After determining the location of the PC, the PDR Terminals and the PDR Hubs (refer to diagram), run the 8 conductor cable, cable similar to telephone cable or 10 Base T Networking Cable. Crimp on the RJ45 connectors with a crimping tool, plug in the connectors to the Network Controller and Hubs (if required), then connect the Network Controller to the PC with a straight through serial cable.

Run the network diagnostic program that will check for the proper connection of all of the hardware. You are now ready to set up the software.

• Home Page
• Personal Data Recorder
• Contact Us